Aimed for the Dive Centre, who use hoses every day with different divers and different configurations, and for divers who perform expeditions where contact with rocks and wrecks are more frequent, Miflex offers the Carbon HD hose, with a larger outside diameter and electroless nickel plated fittings. 

Carbon HD high pressure hoses are approved according to the EN250 standard. 

• Standard fitttings: M 7/16" UNF, F 7/16" UNF 
• Working Pressure: 300 Bar 
• Outside Diameter: 7.5mm 
• Test Results 
• Burst Test Pressure: > 2,000 Bar (EN250 requirement >1250 Bar) 
• Pull-out test: > 250kg (EN250 requirement >100Kg) 
• Colour: Carbon Black in colour

Please Note: All HP Gauge Hoses seal internally when you are connecting to a gauge or console. Please ensure when using these hoses you have a suitable swivel pin / airspool. This is standard for most gauges, consoles etc. If you do not use a swivel pin your HP hose will leak as you have not made the internal seal required. We would strongly recommend that installation is made only by a competent service engineer or via your dive store/service centre. If you are unsure if this will work with your equipment, please check with your product manufacturer.